M-249 SAW SWITCH
3 posters
Page 1 of 1
M-249 SAW SWITCH
by Howie 29th March 2010, 8:42 am
Okay guys,
For those of you who owns an M-249 SAW,out on the field your SAW tends to hang up in full auto and just keeps shooting until you disconnect the battery! Well to fix the problem you have to open it up and partially remove the Gearbox to get to the switch, once the switch is remove you need to cut to Centimeters off the lever of the switch and then assemble the gearbox and reinstall and test fire, I had to do this to both the MKII when I own it, and with the PARA. I do not remember exactly where I found the info, or website. Hope this help you guys out.
For those of you who owns an M-249 SAW,out on the field your SAW tends to hang up in full auto and just keeps shooting until you disconnect the battery! Well to fix the problem you have to open it up and partially remove the Gearbox to get to the switch, once the switch is remove you need to cut to Centimeters off the lever of the switch and then assemble the gearbox and reinstall and test fire, I had to do this to both the MKII when I own it, and with the PARA. I do not remember exactly where I found the info, or website. Hope this help you guys out.
Howie- Your the Man
- Posts : 1785
Join date : 2010-03-07
Age : 48
Location : Milton Florida
Re: M-249 SAW SWITCH
by Wookie850 28th October 2010, 1:28 pm
Hey Howie I'm having problems with the A&K M249 wiring harness popping fuses any ideas how to fix it cause I'm lost on it
Wookie850- Springer
- Posts : 74
Join date : 2010-09-10
Age : 36
Location : Pensacola, FL -
Re: M-249 SAW SWITCH
by Howie 28th October 2010, 1:41 pm
Which Spring are you using! Also make sure there is no bare wires touching metal
Howie- Your the Man
- Posts : 1785
Join date : 2010-03-07
Age : 48
Location : Milton Florida
Re: M-249 SAW SWITCH
by Lugnutz 28th October 2010, 6:23 pm
Heres your new harness. Its ready to drop and swap
[You must be registered and logged in to see this link.]
[You must be registered and logged in to see this link.]
Lugnutz- Springer
- Posts : 88
Join date : 2010-07-22
Age : 36
Location : Pensacola
Re: M-249 SAW SWITCH
by Lugnutz 28th October 2010, 6:26 pm
Its not bad for making from scratch and not having the old harness to work with lol
Lugnutz- Springer
- Posts : 88
Join date : 2010-07-22
Age : 36
Location : Pensacola
Re: M-249 SAW SWITCH
by Guest 12th April 2011, 7:10 pm
Threadomancy:
You can bend it back.
[You must be registered and logged in to see this image.]Pop the pins out.
[You must be registered and logged in to see this image.]Find the switch.
[You must be registered and logged in to see this image.]Bend or cut it back.
Make sure it is not bent too far (like mine currently is in the pic).
You can bend it back.
[You must be registered and logged in to see this image.]Pop the pins out.
[You must be registered and logged in to see this image.]Find the switch.
[You must be registered and logged in to see this image.]Bend or cut it back.
Make sure it is not bent too far (like mine currently is in the pic).
Guest- Guest
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum